INSULATING PAINTS AND INSULATION MATERIALS
PROLAT, guided by the real needs of the construction professional, created a complete line of insulation paints and materials. These paints and materials combine both the expected top quality and quality stability, as well as the economical solution that fully meets the specific needs of the construction.
![PROTECT HYBRID Image](https://www.prolat.gr/wp-content/uploads/2015/07/protect-hybrid.jpg)
PROTECT HYBRID
HYBRID ROOF INSULATION
Powerful hybrid, water-soluble, elastomeric roof sealant. It has excellent adhesion to any surface, such as concrete, cement mortar, old sealants, etc.
![PROTECT HYBRID Image](https://www.prolat.gr/wp-content/uploads/2015/07/protect-hybrid.jpg)
PROTECT HYBRID
HYBRID ROOF INSULATION
Powerful hybrid, water-soluble, elastomeric roof sealant. It has excellent adhesion to any surface, such as concrete, cement mortar, old sealants, etc. After maturation it creates a single protective membrane, extremely resistant to moisture,
With top elasticity and resistance to extreme weather conditions and stagnant water.
Consumption: 1.20 m2 / lt, Color: White
Dilution: Up to 30% (as a primer), 10% and 5% (first and second coat respectively) With clean water
Container 10 lt / pallet 440 lt, container 3 lt / pallet 198 lt
Type: | Roofs Aaterproof |
Application | Roller - Brush - Spray |
Dilution: | No Dilution |
V.O.C.: Volatile Organic Compounds | EU limit value for this product category A/a paints for interior walls and ceilings 75 g/l (2007) and 40 g/l (2010). This product contains maximum 5 g / l VOC. |
![PROTON ROOF Image](https://www.prolat.gr/wp-content/uploads/2015/07/protonroof.jpg)
PROTON ROOF
ROOF INSULATION
High quality acrylic rubber sealant for roofs, parapets, skylights, etc. It has excellent adhesion to any surface, such as concrete, cement mortar, old sealants, etc.
![PROTON ROOF Image](https://www.prolat.gr/wp-content/uploads/2015/07/protonroof.jpg)
PROTON ROOF
ROOF INSULATION
High quality acrylic rubber sealant for roofs, parapets, skylights, etc. It has excellent adhesion to any surface, such as concrete, cement mortar, old sealants, etc. Its very good value and its endurance in adverse weather conditions,
make it ideal for both the individual seeking effective hydration over a lifetime, and for the professional seeking a product with high elasticity and durability.
Consumption: 1.20 m2 / lt, Color: White
Dilution: Up to 30% (as a primer), 10% and 5% (first and second coat respectively) With clean water
Container 9 lt / pallet 396 lt, container 3 lt / pallet 198 lt
Type: | Roofs Aaterproof |
Application: | Roller - Brush - Spray |
Performance: | 1,2m2/lt |
Dilution: | No Dilution |
V.O.C.: Volatile Organic Compounds | EU limit value for this product category A/a paints for interior walls and ceilings 75 g/l (2007) and 40 g/l (2010). This product contains maximum 5 g / l VOC. |
![LAVAPAINT MICRO PRIMER Image](https://www.prolat.gr/wp-content/uploads/2021/09/microprimer.jpg)
LAVAPAINT MICRO PRIMER
Micronized acrylic water primer for walls, with very strong adhesion and high penetration. It is almost harmless, suitable for indoor use.
![LAVAPAINT MICRO PRIMER Image](https://www.prolat.gr/wp-content/uploads/2021/09/microprimer.jpg)
LAVAPAINT MICRO PRIMER
Micronized acrylic water primer for walls, with very strong adhesion and high penetration. It is almost harmless, suitable for indoor use. It is ideal for preparing surfaces to be painted with plastic or acrylic paints, such as plaster, laminate, brick, trowel walls. Stabilizes and acts as an insulator on porous surfaces that are painted in low quality old paints (watercolors, cheap plastics, etc.), balancing their absorbency and ensuring excellent adhesion and smoothness in the final color.
Consumption: 15 m2 / lt
Dilution: 5-10% In clean water
Container 10 lt / pallet 600 lt, container 5 lt / pallet 300 lt, container 1lt / box 10 lt
![PROLASTIC PROOF Image](https://www.prolat.gr/wp-content/uploads/2021/09/waterproof.jpg)
PROLASTIC PROOF
WATERPROOFING MORTAR 1K
Spreadable, cementitious mortar, ideal for sealing concrete surfaces in foundations, basements, elevator shafts, balconies and terraces. It is applied in a roll.
![PROLASTIC PROOF Image](https://www.prolat.gr/wp-content/uploads/2021/09/waterproof.jpg)
PROLASTIC PROOF
WATERPROOFING MORTAR 1K
Spreadable, cementitious mortar, ideal for sealing concrete surfaces in foundations, basements, elevator shafts, balconies and terraces. It is applied in a roll.
Consumption: 1.2kg / m² / mm layer thickness,
Color: White, Water: 6.5lt at 25kg
Sack 25kg / pallet 1200 kg, sack 5 kg
![PROLASTIC SYSTEM Image](https://www.prolat.gr/wp-content/uploads/2021/09/prolastic-system.jpg)
PROLASTIC SYSTEM
WATERPROOFING MORTAR 2K
Resin, coated, 2-component cementitious sealing system with excellent adhesion and high elasticity, ideal for sealing concrete surfaces and capillary bridging in foundations, basements, elevators.
![PROLASTIC SYSTEM Image](https://www.prolat.gr/wp-content/uploads/2021/09/prolastic-system.jpg)
PROLASTIC SYSTEM
WATERPROOFING MORTAR 2K
Resin, coated, 2-component cementitious sealing system with excellent adhesion and high elasticity, ideal for sealing concrete surfaces and capillary bridging in foundations, basements, elevators, elevators, elevators. The minimum application thickness is 2 mm in layers of 1 mm. It is applied in a roll and for greater strength, it is proposed to insert 90gr glass mesh between the 1st and 2nd layer.
Consumption: 1.6 kg / m2 / mm layer thickness, Color: White
Sack 20 kg / pallet 840 kg (system A) and container 10 kg / pallet 420 kg (system B)
![PS On Floor Image](https://www.prolat.gr/wp-content/uploads/2021/09/floor_2020.jpg)
PS On Floor
SEMI SELF-LEVELING EPS / XPS SMOOTHING AND BONDING MORTAR
Powerful, self-leveling, resinous, fiber reinforced cementitious mortar. It is applied in a thickness of 1-3 mm, on surfaces (such as roofs).
![PS On Floor Image](https://www.prolat.gr/wp-content/uploads/2021/09/floor_2020.jpg)
PS On Floor
SEMI SELF-LEVELING EPS / XPS SMOOTHING AND BONDING MORTAR
Powerful, self-leveling, resinous, fiber reinforced cementitious mortar. It is applied in a thickness of 1-3 mm, on surfaces (such as roofs), so that the surface is polished and at the same time the welding of EPS or XPS is done. It can also be used as
economic self-leveling for the removal of surfaces from plywood or cement mortar.
Consumption 4-5 kg / m2, Color: White
Sack 25 kg / pallet 1200 kg